Fujitsu LIFEBOOK TH4410 Скачать руководство пользователя

Страница: 93 / 124

Removing and installing components during servicing

Removing and installing components

during servicing

Only quali

ed technicians should repair your notebook. Unauthorised

opening or incorrect repair may greatly endanger the user (electric shock,

re risk) and will invalidate your warranty.

Components

Servicing

After consulting the Hotline/Service Desk, you may remove and install the
components described in this chapter yourself.

If you remove and install components without consulting the Hotline/Service
Desk, then the warranty of your notebook will be voided.

Notes on installing and removing boards
and components

•

Switch the notebook off and pull the power plug out of the mains socket.

•

Always remove the battery.

•

Take care when you use the locking mechanisms on the battery and any other component.

•

Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.

Notes

Board

ESD

Boards with electrostatic sensitive devices (ESD) are marked with the label
shown.

When handling boards

tted with ESDs, you must always observe the following

points:

•

You must always discharge static build up (e.g. by touching a grounded
object) before working.

•

The equipment and tools you use must be free of static charges.

•

Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.

•

Always hold boards with ESDs by their edges.

•

Never touch pins or conductors on boards

tted with ESDs.

Fujitsu Technology Solutions

Содержание LIFEBOOK TH4410





























































































































Результаты поиска

Содержание LIFEBOOK TH4410

Отзывы:

Похожие инструкции для LIFEBOOK TH4410

Бренды по названию

Популярные бренды

Fujitsu LIFEBOOK TH4410, Руководство по эксплуатации

Результаты поиска

Содержание LIFEBOOK TH4410

Отзывы:

Похожие инструкции для LIFEBOOK TH4410

Бренды по названию

Популярные бренды