background image

152

 

       Appendix A: WLAN User’s Guide

 FCC Regulatory Information

Please note the following regulatory information related to the optional wireless LAN device.

Regulatory Notes and Statements

Wireless LAN, Health and Authorization for use  

Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much 
less than the electromagnetic energy emissions from wireless devices such as mobile phones. Wireless LAN devices are safe for use by 
consumers because they operate within the guidelines found in radio frequency safety standards and recommendations. The use of Wireless 
LAN devices may be restricted in some situations or environments, such as:

On board an airplane, or

In an explosive environment, or

In situations where the interference risk to other devices or services is perceived or identified as harmful.

In cases in which the policy regarding use of Wireless LAN devices in specific environments is not clear (e.g., airports, hospitals, 
chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment.

Regulatory Information/Disclaimers 

Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation 
provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void 
the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by 
unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than those specified 
by the manufacturer. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or 
attachment. The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government 
regulations arising from failure to comply with these guidelines. 

Содержание LIFEBOOK T904 Ultrabook





































































































































































































Отзывы: