background image

151

 - Regulatory Information

Regulatory Information

Notice

Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment.

FCC NOTICES

Notice to Users of Radios and Television 

This equipment has been tested and found to comply with the limit for class B digital devices, pursuant to parts 15 

of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet that is on a different circuit than the receiver.

Consult the dealer or an experienced radio/TV technician for help.

Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF 

emission limits governing this device. 

DOC (INDUSTRY CANADA) NOTICES

Notice to Users of Radios and Television 

This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment 

Regulations.
CET appareil numérique de la class B respecte toutes les exigence du Réglement sur le matérial brouilleur du Canada.

Содержание LIFEBOOK T904 Ultrabook





































































































































































































Отзывы: