Fujitsu LifeBook T732, Руководство по эксплуатации

Страница: 76 / 125

Security functions
Password protection for the hard disk
Passwordprotection:
The had disk password prevents unauthorised access to the hard disk drives
and is checked internally each time the system is booted. The condition for this
is that you have assigned at least the supervisor password.
Activating hard disk protection
►
Call up the
BIOS Setup
and select the
Security
menu.
If you have not assigned BIOS passwords yet, define the supervisor and the user
password now, if desired (see
"Security functions", Page 68 ).
►
Mark the Hard Disk Security field and press the Enter key.
►
In the
Drive0
area mark the
Set Master Password
field and press the Enter key.
Enter new Password
then appears and you are asked to enter a password.
►
Enter the password and press the Enter key.
Confirm new Password requires you to confirm the password.
►
Enter the password again and press the Enter key.
Setup Notice: Changes have been saved is displayed to confirm that the
new password has been saved.
►
To assign the password for the second hard disk (
Drive1
), go to the
Drive1
area and
select the field Set Master Password , then proceed in exactly the same way as for
setting up the password for the first hard disk (
Drive0
).
The field Password Entry on Boot is set to Enabled by default. You can exit the BIOS
Setup
once you have finished changing the settings.
►
From the
Exit
menu, choose the option
Exit Saving Changes
.
►
Press the Enter key and select
Yes
.
The notebook reboots and your hard disk is now protected with a password. The system
will ask you to enter the password when the notebook is restarted again.
Deactivating hard disk protection
To cancel a password without setting a new one, proceed as follows:
►
Call up the
BIOS Setup
and select the
Security
menu.
►
Mark the
Hard Disk Security
field and press the Enter key.
►
In the
Drive0
area mark the
Set Master Password
field and press the Enter key.
You will be initially requested to enter the old password by the Enter current Password prompt.
You will then be requested to enter a new password by the Enter new Password prompt.
►
After entering the password, press the Enter key three times.
►
From the Exit menu, choose the option Exit Saving Changes .
►
Press the Enter key and select Yes .
The notebook reboots, and password protection for the hard disk is cancelled.
►
To cancel the password for the second hard disk ( Drive1 ), go to the Drive1 area
and select the field
Set Master Password
, then proceed in exactly the same way as
for cancelling the password for the first hard disk ( Drive0 ).
72 Fujitsu