Fujitsu Lifebook S4542, Руководство пользователя

Страница: 85 / 108

75
T r o u b l e s h o o t i n g
RECOVERY CD-ROM
Included with your LifeBook are the Emergency
Recovery CD and Drivers and Application Restore CD.
The Emergency Recovery CD contains the following:
■
Installation files for Internet Explorer
■
A backup copy of the software originally installed on
your Fujitsu LifeBook (can only be used on the listed
LifeBook models)
The Drivers and Application Restore CD contains
the following:
■
Installation files for pre-installed software.
■
Sets of device drivers and Fujitsu utilities (in specific
directories) that are unique to your LifeBook configu-
ration for use as documented below.
■
Read-me files that provide additional use information
for items on this CD-ROM.
Restoring Your Pre-installed Software
from CD-ROM
The Emergency Recovery CD-ROM enables restoration
of your LifeBook disk drive contents as they were origi-
nally shipped from the factory. Most often this is neces-
sary if files or software programs (only those files/
programs that came pre-installed) become corrupt
or accidentally erased.
You have two options available when
performing recovery:
1. Recover Hard Drive without Format. This choice
replaces all the original factory installed files and
program structures without eliminating your data
files. You will have to re-install any software that was
not included with the computer when you bought it,
however you data will be intact as long
as the installation of the additional programs is
performed in the same manner.
2. Format and Recover Hard Drive. This choice
removes all the information on the hard disk. If you
choose this option, you will lose any software you
have installed and any other files you created since
you setup your computer. You will have to re-install
any software that was not included with the
computer when you bought it.
To Run the Emergency Recovery Program
To use this portion of the CD-ROM, your LifeBook must
Boot up (upon power up or full system reset/restart)
from the CD-ROM drive.
1. Insert the Emergency Recovery CD in the
CD-ROM drive.
2. If your LifeBook is running when you insert the
CD, exit your operating system and power down
the LifeBook.
3. Start (power up) your LifeBook.
4. At this point, you must either change your
BIOS setup configuration through the [F2] key
to have the computer boot from the CD-ROM
“first” (if you have not previously done so), or
you can use the [ESC] key during this boot-up
sequence and select the CD-ROM from the menu
that will appear. (See BIOS Setup Utility on page 33
for more information)
5. If correctly configured to boot from the Recovery
CD-ROM, you will notice your system running a full
virus scan of the hard drive and then reach the
Emergency Recovery Welcome screen. If this is not
what is displayed, check to see that the Recovery CD
is installed in the CD-ROM drive and repeat the
previous steps, starting with 2. If you received
a message “This program may not be used on your
computer” you are using the wrong Recovery CD for
the model of LifeBook. Contact Fujitsu PC Service
and Support to obtain the correct CD.
6. Read the information displayed on the Welcome
screen, then click OK.
7. Select one of the two icons displayed in the Emer-
gency Recovery menu and follow the instructions.
P O I N T
If you have access to the internet, visit the Fujitsu PC
Corporation Support Web site at www.8fujitsu.com
to check for the most current information, drivers and
hints on how to perform recovery and system updates.
P O I N T
It is recommended that you back-up all data files prior
to performing either of the recovery options.
C A U T I O N
User data and user installed software CANNOT be
recovered from the Emergency Recovery CD.
P O I N T
The Internal LAN Adapter must be disabled in the BIOS
before performing a recovery. After the recovery is
complete and you have gone through the registration
process, you can then re-enable the Internal LAN
Adapter through the BIOS.