Fujitsu Lifebook E360, Руководство пользователя

Страница: 93 / 147

Four
U s e r I n s t a l l a b l e F e a t u r e s
L i f e B o o k E S e r i e s f r o m F u j i t s u
83
P O I N T
After installing your added memory
module, you must complete the Resetting
the Save-to-Disk Parameters procedure
in order for the Save-to-Disk mode to
operate properly on your LifeBook.
(
See pages 65-66. )
C A U T I O N
The memory upgrade module can
be severely damaged by electro-static
discharge (ESD). Be sure you are
properly grounded when handling
and removing the module.
Checking the Computer
Recognition of New Memory Capacity
When you have changed system memory capac-
ity by adding or removing a memory upgrade
module, be sure to check that your notebook
has recognized all of the memory. You can
check memory capacity by looking at the
Main menu of the setup utility:
1. Turn on power using the power switch.
2. Enter the setup utility by pressing the F2
key as soon as the Fujitsu logo appears
on the screen.
3. The System Memory and the Extended
Memory capacity, as detected by your note-
book during the Power On Self Test (POST),
are displayed at the bottom of the Main
menu screen.
Example: A system with 32MB of memory
will display 640K System Memory, 31MB
Extended Memory.
When you have installed additional memory,
the display should change. For example for:
Total RAM System Extended
Installed Memory Memory
32 MB 640 K 31 MB
64 MB 640 K 63 MB
96 MB 640 K 95 MB
128 MB 640 K 127 MB
160 MB 640 K 159 MB
192 MB 640 K 191 MB
If the total memory displayed is not what you
believe it should be, check that your memory
upgrade module is properly installed. If it is
properly installed and the capacity is not cor-
rectly recognized, see the Troubleshooting
Section starting on page 90.