Fujitsu Lifebook E-6571, Руководство пользователя

Страница: 35 / 110

27
G e t t i n g t o K n o w Y o u r L i f e B o o k
Setting Supervisor Password
You must have set a supervisor password before setting
any user passwords. The supervisor password can bypass
the user password.
1. Go to the Start menu.
2. Click on Run .
3. Type in
FJSECS.EXE
, then press [Enter]
4. Follow the on-screen instructions to set the
Supervisor password.
Setting User Password
1 Go to the Start menu.
2. Click on Programs .
3. Click on Security Panel Application and
Set User Password .
4. Follow the on-screen instructions to set the
user password.
OPERATING YOUR LIFEBOOK SECURITY
APPLICATION PANEL
The security lock feature is in effect both when the system
resumes from OFF or suspend state. You would always
need to push the Suspend /Resume button to input the
user password. Your system will not begin the boot
sequence without entering your supervisor/user pass-
word.
From Off State
1. Turn on your system.
2. When Lock Indicator LED lights up, enter the pass-
word and press Enter button.
For example, if the password is 22222,
Press Button Number 2 five times and press Enter
button.
The LifeBook will boot to normal operation.
From Suspend State
1. Press your Suspend/Resume button.
2. When Lock Indicator LED lights up, enter the pass-
word and press Enter button.
The LifeBook should resume normal operation.
Incorrect Password Entry
If an invalid supervisor or user password is entered three
times in succession, the system will “beep” for about one
minute. If a valid password is entered within a minute
(while system beeps), the beeping will stop and the Life-
Book will resume normal operation. If no or an invalid
password is entered while the system beeps, the system
will return to its previous locked state (suspend or off)
and the Lock Indicator LED will go off. To reactivate the
LifeBook after a password failure, you must press the
Suspend/Resume button, then enter a correct password.
PRECAUTIONS
Opening and Closing the Cover
Closing the cover automatically places the LifeBook into
suspend mode. Opening the cover does not automati-
cally place the LifeBook into normal operation. Instead,
you must enter the proper security password after
pushing the Suspend/Resume button.
Low Battery Operations
If your LifeBook has low battery, pushing the suspend/
resume button only turns on the Lock Indicator LED.
Your LifeBook does not unlock, the Lock Indicator LED
turns off after one minute. To resume normal opera-
tion, first attach a power supply to the LifeBook. Then
you may unlock the LifeBook.
UNINSTALLING THE SECURITY
PANEL APPLICATION
You have two options when uninstalling the security
panel application:
■
Uninstall the security panel application software.
This will disable all security feature.
■
Uninstall the security panel application with
password still active. This will not allow any
changes to the password.
Uninstalling the Security Panel
Application Software
Remove passwords when User wants no password
protection whatsoever and doesn’t want to give anybody
the utility to set a password on their computer. In this
case, if passwords (supervisor, user, or both) are set, the
passwords must first be cleared BEFORE removing the
application. To clear passwords, follow same procedure
in SETTING PASSWORD CODES except this time,
select REMOVE, enter current password then click
Next .
When asked to confirm select Yes .
P O I N T
You may change or remove the supervisor or user
password by repeating the steps defined above.
P O I N T
Remember the user password you specified on the
Security Panel Application. If you forget the password
you will not be able to use your computer. The super-
visor password can override the user password.
!