66
- Color Lid for LifeBook
Installing a color lid
Color lids are attached to connections on the top of the display cover and adjacent to the cover hinges.
To install a color lid:
1
Attach a color lid to your PC by lying it flat against the back of the display and aligning the two hooks with the
corresponding notches located in front of the display hinges. (The notch locations are shown in Figure 26.)
2
There are four hooks along each side and four along the front edge. Attach the side hooks first, starting from
the hinge edge, by pressing gently at the hook location.
3
Attach the front hooks, starting from the outside edges.
Removing a color lid
1
Unhook the front edge of the lid first, starting with the two inside hooks.
2
Unhook the sides of the lid, starting with the front ones and moving back.
3
Remove the lid by unlatching the two hooks from the hinge notches.
•
U
SE
CARE
WHEN
INSTALLING
OR
REMOVING
A
COLOR
LID
;
THE
EDGES
ARE
SHARP
AND
MAY
CAUSE
INJURY
.
•
W
HEN
INSTALLING
OR
REMOVING
A
COLOR
LID
,
ALIGN
EACH
HOOK
OF
THE
COLOR
LID
TO
ITS
CORRESPONDING
NOTCH
ON
YOUR
PC. I
F
NOT
ALIGNED
CORRECTLY
,
THE
HOOK
MAY
BE
BROKEN
. I
F
A
HOOK
BECOMES
BROKEN
,
THE
COLOR
LID
SHOULD
NOT
BE
USED
ON
YOUR
PC.
•
D
O
NOT
USE
EXCESSIVE
FORCE
WHEN
PRESSING
DOWN
ON
THE
ATTACHMENT
POINTS
;
DOING
SO
COULD
RESULT
IN
DAMAGE
TO
YOUR
DISPLAY
.
•
D
O
NOT
EXPOSE
THE
COLOR
LID
TO
HIGH
TEMPERATURES
;
IT
MAY
BE
DAMAGED
BY
HIGH
TEMPERATURES
.
•
W
HEN
YOU
CLEAN
A
COLOR
LID
,
WIPE
IT
GENTLY
WITH
A
DRY
,
CLEAN
CLOTH
. N
EVER
USE
ANY
CHEMICALS
OR
OTHER
VOLATILE
MATERIALS
WHICH
COULD
DAMAGE
YOUR
COLOR
LID
.
