Fujitsu LAN Console, Установка, настройка и эксплуатация

Страница: 73 / 139

U41224-J-Z916-1-76
67
Configuration TeleCall
6.4.1.3 Software installation on the RM
Ê
Install the
SItelx
software package using the
pkgadd
command, or from the
CD-SYS-MI via the sysadm user interface.
Ê Answer the questions during installation as follows:

Do You want to use DOMAIN TELESERVICE DISTRIBUTION immediately?

 

(Standard: n) [y,n,?] y


Select node to collect for TELESERVICE: < LAN Console SystemName >

 
6.4.1.4 Software installation on the PRIMEPOWER (MR)
Ê
Install the
SMAWtelx
and
SMAWskel
software packages (from the
Teleservice_Distribution directory on the system management CD). The soft-
ware packages are installed automatically in accordance with Solaris 8 con-
ventions.
Ê Answer the questions during installation with yes .
6.4.2 Generating the Telecall cluster
Before continuing with generation of the TeleCall cluster,
Ê make sure that the
SMAWtelx
or
SItelx
software package has been installed
on all machines involved and that the LAN Console has a fully functional
Teleservice connection to a Siemens IT Service Teleservice center.
Ê test this if you need to via the Teleservice menu (submenu: – Simple
TELESERVICE Administration , menu item: – Test Connection to a Teleservice
Center
).
I
Note that this function can only be used in conjunction with the sup-
port center that is responsible for you (see the introduction to the sec-
tion “TeleCall“).
The TeleCall cluster now has to be generated on the LAN Console.
1. Log in to the LAN Console under a user ID with root privileges and start the
teleadm command from the shell. You will see the following start screen: