Fujitsu LAN Console, Установка, настройка и эксплуатация

Страница: 57 / 139

U41224-J-Z916-1-76
51
Configuration Configuring the LAN Console and RCA
6.2.2 New ports for the RCA
Figure 21: New ports for the RCA
Further configuration entries for an existing LAN Console are created by means
of the
/opt/SMAW/SMAWxsco/sbin/mklancon
script - as shown in figure “Configur-
ing the LAN Console and the RCA” on page 41 and “Commands” on page 43.
A password has to be assigned in
mklancon to the specified port for each new
entry. This password has to be notified to the RCA by entering it under the
Configuration entry
for <port number RCA>
New ports on the LAN console
Configuration entry
correct ?
Another
configuration entry?
Delete
configuration entry
Remote setup
Password
for <port number RCA>
Another
<port number RCA> ?
Save setup
data
mklancon
yes
rmlancon
showlancon
no
RCA
rsh ... setup
(section 8.1.4 ports)
(section 8.1.12 end)
yes
no
no
yes