Fujitsu IPAD100-20 Скачать руководство пользователя | Manualshive

Страница: 49 / 60

background image

47

>>Reference>>

For information about charging the auxiliary battery, see Section 1.2.4,

"Charging the auxiliary battery."

11.3 Long-term storage

Store the iPAD where it will not be exposed to vibration, dust, high and low temperatures, high humidity, and
direct sunlight.

Storing the iPAD with the programs saved
To avoid discharging of the main and auxiliary batteries, charge the main battery once every week.
Without charging, the programs and data in memory will be lost.

Storing the iPAD without the programs saved
To store the iPAD without the programs saved, remove the main battery and completely reset the iPAD.

>>Reference>> For information about removing the battery, see Section 1.2.3," Installing and

removing the main battery," and Section 1.2.4, "Charging the auxiliary battery."
For information about completely resetting the iPAD, see Section 3.7.2, "Completely
resetting the iPAD."

11.4 Cleaning

Clean the cover of the iPAD using a cloth moistened with a solution of water and neutral detergent and
wrung out or a dry cloth. If you use a damp cloth, be sure to wring it out thoroughly to prevent water from
getting into the iPAD, causing a malfunction.
Do not wipe the iPAD using thinner, benzine, or other volatile solvent. Such materials can discolor the
iPAD or erase printed characters.

Wipe the display area of the iPAD using a cloth moistened with water and wrung out thoroughly or a glass
wipe with a very fine texture.

Occasionally clean the cradle interface using a dry cotton swab or gauze. If the terminals become dirty,
contact may be poor, causing the IPAD to turn off or disabling normal charging and communication.

11.5 Other precautions

Do not disassemble or modify the iPAD.

To prevent the iPAD from malfunctioning, do not leave the iPAD, even for a short time, where it is
exposed to any of the following conditions:

−

Extreme heat (for example, car in sunlight with the windows closed)

−

Direct sunlight

−

Extreme heat or cold

−

Dust

−

Strong vibration

−

Humidity

Do not apply a strong shock to the iPAD. Do not drop the iPAD.

Be careful not to hold the iPAD for a long time in a high-temperature environment (95

o

F or higher).

Doing so may result in a low-temperature burn.

«
...
47
48
49
50
51
...
»

Содержание IPAD100-20





























































Отзывы:

Нет отзывов

Похожие инструкции для IPAD100-20

Бренд: Wileyfox Страницы: 38

Бренд: NEC Страницы: 102

Pocket LOOX 400 Series

Бренд: Fujitsu Siemens Computers Страницы: 66

Бренд: Hach Страницы: 52

Бренд: Falcon Страницы: 68

Бренд: Unitech Страницы: 152

PEG-SJ22 - Personal Entertainment Organizer

Бренд: Sony Страницы: 169

PEG-S300 Read This First

Бренд: Sony Страницы: 40

Бренд: Nagra Страницы: 77

Бренд: AML Страницы: 2

Бренд: Itronix Страницы: 15

Бренд: DSIC Страницы: 81

Бренд: Arbor Technology Страницы: 12

Бренд: Arbor Technology Страницы: 59

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды