Fujitsu IP-9610, Руководство пользователя по оборудованию

Страница: 40 / 90

Chapter 2 Installation and Connection
IP-9610
26
2.6
Connection to Network
To connect IP-9610 to a LAN device, connect the LAN device to the LAN communication port
[CONSOLE/LAN1/LAN2] of IP-9610 using a LAN cable (UTP cable). The LAN communication
port specification of IP-9610 is 10BASE-T/100BASE-TX /1000BASE-T for CONSOLE, LAN1 and
LAN2.
The figure below shows the connection method.
For details about connectors and cables, see Section 4.2, “Cable and Connector Details.”
For electrical specifications, see Appendix 2.3, “Function Specifications.”
Figure Connection to network
Please do not provision the IP address below.
LAN/Console ports;
・
IP address commonly unused
（
0.0.0.0
，
255.255.255.255
，
etc…
）
・
Loop back address (127.xxx.xxx.xxx)
・
Class D and Class E addresses
・
IP address already used
Console port only;
･ IP address (169.254.xxx.xxx) used when LAN port cannot obtain IP address
normally from DHCP server.
For more information, see IP-9610 Software User’s Guide.
HUB, Router, etc
NETWORK/CONSOLE
CONSOLE
Client PC
2.6
CAUTION
NOTE: