Fujitsu Inverter Halcyon AOU12RLS Скачать руководство пользователя страница 15

En-14

Air Cleaning Filter Installation

1. Open the Open Panel and remove the Air

filters.

2. Attach the air cleaning filter to the frame

of the front panel.

Attach the filter on the inside of the tabs (6 places) so
as not to stick out.

(In the above figure, the open panel is omitted for
the explanation)

3. Install the two Air filters and close the

Open Panel.

Don't operate the air conditioner with being opened
the open panel.

When air cleaning filters are used, the effect will increased
by setting the fan speed to “High”.

2. Remove the air cleaning filters attached

to the frames of the front panel.

3. Replace them by two new Air cleaning

filters.

1

Remove the old air cleaning filters in reverse order of
their installation.

2

Install in the same way as for installation of the air
cleaning filter set.

4. Install the two Air filters and close the

Open Panel.

Don't operate the air conditioner with being opened
the open panel.

About the Air Cleaning Filters

POLYPHENOL CATECHIN AIR CLEANING FILTER (one sheet)

The Air Cleaning Filters are disposable filters. (They can
not be washed and reused.)

For storage of the Air Cleaning Filters, use the filters as
soon as possible after opening the package.
(The air cleaning effect decreases when the filters are left
in the opened package)

Generally, the filters should be exchanged about every
three months.

Please buy designed air cleaning filters (UTR-FC03-2) (Sold
separately) to exchange the used dirty air cleaning filter.

[Negative air ions deodorizing filter (one sheet) — light blue]

The filter should be exchanged about every three years
so as to maintain the deodorizing effect.

Filter frame is not a one-off product.

Please buy designed deodorizing filter (UTR-FC03-3) (Sold
separately) when exchanging the filter.

Maintenance of Deodorizing Filters

In order to maintain the deodorizing effect, please clean the
filter in the follow way once three months.

1 Remove the deodorizing filter.
2 Clean with water and dry in the air.

1) Flush the filter with high-pressure hot water until

the surface of the filter is covered with water. Please
flush with diluent neutral detergent.
Never wash by reaming or rubbing, otherwise it
will damage the deodorizing effect.

2) Rinse with water flow.
3) Dry in shade.

3 Reinstall the deodorizing filter.

Replacing dirty Air cleaning filters

Replace filters with the following components (purchased sepa-
rately).

POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR-FC03-2

Negative air ions deodorizing filter: UTR-FC03-3

1. Open the Open Panel and remove the Air fil-

ters.

Air cleaning filter frame

Tabs (6 places)

Air filter

Содержание Inverter Halcyon AOU12RLS





















Отзывы: