En-6
Press the ECONOMY button for more than 2 seconds to select
whether the room temperature is detected at the indoor unit or
the remote controller.
When the
thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
•
If this function is locked, the location where the room temperature is detected cannot be changed and the
mark
fl
ashes
when the ECONOMY button is pushed for 2 seconds or more.
Indoor unit
Room temperature sensor selection
OPERATION
Child lock function
Press the DAY (DAY OFF) button and TIMER SET button
simultaneously for 2 seconds or more to activate the child lock
function and lock all of the buttons on the remote controller
except the START/STOP button, SET TEMP. buttons, MODE
button, and FAN button. Press the buttons again for 2 seconds
or more to deactivate the child lock function.
When the child lock function is activated, the
mark
appears. If any button is pressed during the child lock, the
CL
display
fl
ashes.
•
This function is locked at the factory. In order to detect the room temperature correctly, consult authorized serv-
ice personnel when using this function.
9374379439_OM_1.indd Sec1:6
9374379439_OM_1.indd Sec1:6
3/12/2553 15:43:06
3/12/2553 15:43:06
