9
TIMER OPERATION
Before using the timer function, be sure that the Remote Controller is set to the correct current time (
☞
P. 5).
To Use the ON timer or OFF timer
1
Press the START/STOP button (Fig. 5
M
)
(if the indoor unit is already operating, proceed to step 2).
The indoor unit’s OPERATION Indicator Lamp (green) (Fig. 3
5
) will light.
2
Press the TIMER MODE button (Fig. 5
K
) to select the
OFF timer or ON timer operation.
Each time the button is pressed the timer function changes in the following
order:
CANCEL
OFF
ON
PROGRAM
(OFF
o
ON, OFF
m
ON)
The indoor unit’s TIMER Indicator Lamp (orange) (Fig. 3
6
) will light.
3
Use the TIMER SET buttons (Fig. 5
Q
) to set the de-
sired OFF time or ON time.
Set the time while the time display is ashing (the ashing will continue for
about 5 seconds).
button:
Press to advance the time.
button:
Press to reverse the time.
About 5 seconds later, the entire display will reappear.
To Use the Program timer
1
Press the START/STOP button (Fig. 5
M
)
(if the indoor unit is already operating, proceed to step 2).
The indoor unit’s OPERATION Indicator Lamp (green) (Fig. 3
5
) will light.
2
Set the desired times for OFF timer and ON timer.
See the section “To Use the ON timer or OFF timer” to set the desired mode
and times.
About 3 seconds later, the entire display will reappear.
The indoor unit’s TIMER Indicator Lamp (orange) (Fig. 3
6
) will light.
3
Press the TIMER MODE button (Fig. 5
K
) to select the
PROGRAM timer operation (OFF ON or OFF ON
will display).
The display will alternately show “OFF timer” and “ON timer”, then change to
show the time setting for the operation to occur rst.
●
The program timer will begin operation. (If the ON timer has been selected
to operate rst, the indoor unit will stop operating at this point.)
About 5 seconds later, the entire display will reappear.
About the Program timer
●
The program timer allows you to integrate OFF timer and ON timer operations in a
single sequence. The sequence can involve 1 transition from OFF timer to ON timer,
or from ON timer to OFF timer, within a 24 hour period.
●
The rst timer function to operate will be the 1 set nearest to the current time. The
order of operation is indicated by the arrow in the Remote Controller's Display
(OFF ON, or OFF ON).
●
One example of Program timer use might be to have the air conditioner automati-
cally stop (OFF timer) the operation after you go to sleep, then start (ON timer) the
operation automatically in the morning before you arise.
To Cancel the Timer
Use the TIMER button to select “CANCEL”.
The indoor unit will return to normal operation.
To Change the Timer Settings
Perform steps
2
and
3
.
To Stop Air Conditioner Operation while
the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change operating conditions
(Mode, Fan Speed, Thermostat Setting,
SUPER QUIET mode), after making the timer
setting and waiting until the entire display
reappears, then press the appropriate buttons
to change the operating condition desired.
To Cancel the Timer
Use the TIMER MODE button to select “CAN-
CEL”.
The air conditioner will return to normal opera-
tion.
To Change the Timer Settings
1. Follow the instructions given in the section “To
Use the ON Timer or OFF Timer” to select
the timer setting you wish to change.
2. Press the TIMER MODE button to select
either OFF
ON or OFF
ON.
To Stop Air Conditioner Operation while
the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change operating conditions
(Mode, Fan Speed, Thermostat Setting, SUPER
QUIET mode), after making the timer setting
and waiting until the entire display reappears,
then press the appropriate buttons to change
the operating condition desired.
▲
▲
▲
▼
9318657012_OM_EN.indd 9
7/31/2012 10:36:51 AM
