Fujitsu Inverter 9318657012 Скачать руководство пользователя страница 15

Страница: 15 / 16

CLEANING AND CARE

2. Remove the air cleaning lters attached

to the frames of the front panel.

3. Replace them by two new Air cleaning

lters.

Remove the old air cleaning lters in reverse order of

their installation.

Install in the same way as for installation of the air

cleaning lter set.

4. Install the two Air lters and close the

Intake Grille.

●

Don't operate the air conditioner with being opened the
intake grille.

About the Air Cleaning Filters

AIR CLEANING FILTER (Two sheet)

●

The Air Cleaning Filters are disposable lters. (They can

not be washed and reused.)

●

For storage of the Air Cleaning Filters, use the lters as

soon as possible after opening the package.

(The air cleaning effect decreases when the lters are left in
the opened package)

●

In order to maintain the air cleaning effect, it is recommend-

ed to replace the lter every 3 years.

Please buy designed air cleaning lters (UTR-FA16-3) (Sold
separately) to exchange the used dirty air cleaning lter.

Maintenance of Air Cleaning Filters

In order to maintain the air cleaning effect, please clean the
lter in the follow way once six months.

Remove the air cleaning lter.

Clean with water and dry in the air.

1) Flush the lter with fresh or warm water. Please ush

with diluted neutral detergent when extremely dirty.

Never wash by reaming or rubbing, otherwise it
will damage the deodorizing effect.

2) Rinse with water ow.
3) Dry in shade.

Reinstall the air cleaning lter.

Air Cleaning Filter Installation

1. Open the Intake Grille and remove the

Air lters.

2. Attach the air cleaning lter to the frame

of the front panel.

●

Attach the lter on the inside of the tabs (7 places) so

as not to stick out.

(In the above gure, the intake grille is omitted for the
explanation)

3. Install the two Air lters and close the

Intake Grille.

●

Don't operate the air conditioner with being opened

the intake grille.

●

When air cleaning lters are used, the effect will increased

by setting the fan speed to “High”.

Replacing dirty Air cleaning lters

Replace lters with the following components (purchased
separately).

●

AIR CLEANING FILTER : UTR-FA16-3

1. Open the Intake Grille and remove the

Air lters.

Tabs (6 places)

Air cleaning lter frame

Tabs (7 places)

Air Cleaning Filter

Air cleaning lter frame

9318657012_OM_EN.indd 15

7/31/2012 10:38:21 AM

Содержание Inverter 9318657012

















Результаты поиска

Содержание Inverter 9318657012

Отзывы:

Похожие инструкции для Inverter 9318657012

Бренды по названию

Популярные бренды

Fujitsu Inverter 9318657012, Руководство по эксплуатации

Результаты поиска

Содержание Inverter 9318657012

Отзывы:

Похожие инструкции для Inverter 9318657012

Бренды по названию

Популярные бренды