Fujitsu Halcyon AOU36T Скачать руководство пользователя

Страница: 22 / 25

En-

Cleaning the Intake Grille

1. Open the Intake Grille.

Place your fingers at both lower ends of the grille
panel, and lift forward; if the grille seems to catch
partway through its movement, continue lifting up-
ward to remove.

Pull past the intermediate catch and open the Intake
Grille wide so that it becomes horizontal.

2. Unlock the Intake Grille.

Hold the Intake Grille with one hand and pull the Knobs
on the right and the left all the way to unlock the Intake
Grille.

3. Clean with water.

Remove dust with a vacuum cleaner: wipe the unit with
warm water, then dry with a clean, soft cloth.

4. Set the mounting shaft of the Intake Grille

into the bearings at the top of the panel.

Pull the Knobs all the way.

Hold the grille horizontal and set the left and right
mounting shafts into the bearings at the top of the
panel.

5. Lock the Intake Grille.

Hold the Intake Grille with one hand and push the Knobs
on the right and the left all the way in to lock the Intake
Grille mounting shafts.

6. Close the Intake Grille.

Push the lower edge of the Intake Grille at both ends and
at the center to close it.

CAUTION!

Do not operate with open Intake Grille, as this can
cause accidents.

Intake Grille

Knob

Raise the horizontal Intake Grille to remove it.

Intake Grille

Mounting shaft

Knob

Intake
Grille

Mounting
shaft

Bearing

Knob

Intake Grille

Mounting shaft

Intake Grille

Содержание Halcyon AOU36T


























Результаты поиска

Содержание Halcyon AOU36T

Отзывы:

Похожие инструкции для Halcyon AOU36T

Бренды по названию

Популярные бренды

Fujitsu Halcyon AOU36T, Руководство по эксплуатации

Результаты поиска

Содержание Halcyon AOU36T

Отзывы:

Похожие инструкции для Halcyon AOU36T

Бренды по названию

Популярные бренды