background image

- 25 -

BIOS Setup

English

&

&

&

&

&

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.

&

&

&

&

&

IDE Primary Master, Slave / IDE Secondary Master, Slave

The category identifies the types of hard disk from drive C to F that has been installed in the

computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto
type which will automatically detect HDD type.

Note that the specifications of your drive must match with the drive table. The hard disk will

not work properly if you enter improper information for this category.

If you select User Type, related information will be asked to enter to the following items. Enter

the information directly from the keyboard and press <Enter>. Such information should be provided
in the documentation form your hard disk vendor or the system manufacturer.

CYLS.

Number of cylinders

HEADS

Number of heads

PRECOMP

Write precomp

LANDZONE

Landing zone

SECTORS

Number of sectors

If a hard disk has not been installed select NONE and press <Enter>.

&

&

&

&

&

Drive A / Drive B

The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.

None

No floppy drive installed

360K, 5.25"

5.25 inch PC-type standard drive; 360K byte capacity.

1.2M, 5.25"

5.25 inch AT-type high-density drive; 1.2M byte capacity

(3.5 inch when 3 Mode is Enabled).

720K, 3.5"

3.5 inch double-sided drive; 720K byte capacity

1.44M, 3.5"

3.5 inch double-sided drive; 1.44M byte capacity.

2.88M, 3.5"

3.5 inch double-sided drive; 2.88M byte capacity.

Содержание GA-8SGXL P4 Titan DDR










































Отзывы: