- 17 -
Hardware Installation Process
English
5) ATX POWER (ATX Power Connector)
AC power cord should only be connected to
your power supply unit after ATX power cable
and other related devices are firmly connected
to the motherboard.
20
1
PS-ON
(Soft On/Off)
3.3V
GND
GND
GND
VCC
-5V
-12V
GND
VCC
3.3V
3.3V
GND
GND
GND
VCC
VCC
+12V
5V SB
(Stand by +5V)
Power Good
6) FDD (Floppy Connector)
1
Please connect the floppy drive ribbon cables to
FDD. It supports 360K,1.2M, 720K, 1.44M and
2.88M bytes floppy disk types.
The red stripe of the ribbon cable must be the
same side with the Pin1.
7) IDE1/ IDE2 [IDE1 / IDE2 Connector (Primary/Secondary)]
Important Notice:
Please connect first hard disk to IDE1 and con-
nect CD-ROM to IDE2.
The red stripe of the ribbon cable must be the
same side with the Pin1.
IDE1
IDE2
1
1
