Fujitsu FibreCAT S80, Руководство пользователя

Страница: 50 / 90

46
U41578-J-Z875-1-76
RAID wizard
So far we have built disk groups and assigned and configured LUNs. We have
not done anything to the hard disk drives. Click the Next button to move onto the
next display. This shows which LUNs are assigned to which port and which HBA
is active on the current port.
IMPORTANT: The Topology option must always be set to Multi-Port.
Select a port by clicking its radio button.
C stands for Channel and P for Port.
If you click at Enclosure, Rear View, you find the following picture. It will make
things easier to understand.
In the SAN-LUN mapping form another numbering method is used for the
channels. Start with C1 (instead of C0); this means that the second channel is
numbered as C2 rather than C1.
All the HBAs (Host Bus Adapters; these are the fibre channel controllers in the
host system) previously or currently linked to the FibreCAT S80 system are
listed here. Coloured dots to the left of the HBA name indicate which of the
HBAs are currently available. A green dot indicates that a HBA is active. You can
only change the HBA <=>LUN assignments of active HBAs.