manualshive.com logo in svg

Fujitsu FibreCAT S80, Руководство пользователя

Поделиться
Скачать
Fujitsu FibreCAT S80 Скачать руководство пользователя страница 48

44

 

 U41578-J-Z875-1-76

RAID wizard

With the FibreCAT S80 you can set the stripe size once only. The stripe size 
selected is then valid for all the LUNs in the FibreCAT S80 system. If you click 
the check box under Init (Fg) this will start foreground initialisation. You must 
select this option with version 8.20 of the RAID controller firmware. Foreground 
initialisation starts automatically when you leave the configuration procedure. 

IMPORTANT:
The system cannot be accessed during foreground initialisation. On full-
configuration systems (56 HDDs /4.1 TB), foreground initialisation can last 
as much as four days.

You must always create a „Mini-LUN 0“ of 10 MByte for Cluster and/or 
Server View reasons. This LUN 0 shall be visible for all nodes in a cluster.

The Mini-LUN shall not be grouped in any failover Group (i.e. DDM).

Use the Logical Drive button to add and configure further logical drives. 

If you create more than one LUN, the LUN numbering has to be in an ascending 
order. No “gaps” are allowed. If you leave “gaps”, you will be in trouble, if later 
LUNs will be added.

Содержание FibreCAT S80



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды