|
14
4.3. Cleaning the Rollers
When ink or paper dust is stuck on the imprinter feed roller
surfaces, documents may not feed smoothly.
To prevent feed problems, clean the roller surfaces
regularly.
HINT
The recommended cleaning cycle is every 5,000 sheets. The
actual cleaning cycle may be shorter depending on how often the
imprinter is used and the documents.
1. Open the print section.
2. Clean the rubber rollers.
Clean the rubber rollers (eight in total) under the
feeding section.
Gently wipe the dirt and dust off the surface of the
rollers with a cloth moistened with Cleaner F1.
ATTENTION
It may take a long time to dry if an excessive amount of
Cleaner F1 is used. Use it in small quantity. Wipe off the
cleaner completely to leave no residue on the cleaned parts.
Clean the entire surface of the rubber rollers as you
rotate them manually.
ATTENTION
When cleaning, be careful not to touch the metal wheels
located at the print section.
3. Clean the plastic rollers.
Clean the two plastic rollers (black) at the print
section.
Rotate the rollers manually while gently wiping the
dirt and dust off the surface of the rollers with a cloth
moistened with Cleaner F1.
4. Confirm that the dirt is removed and then close
the print section.
4.4. Cleaning Materials
Name
Part No.
Notes
Cleaner F1
PA03950-0352
Volume:
100 ml
Cleaning Wipe
PA03950-0419
24 packets
(*1) (*2)
*1
For information about the cleaning materials, contact your FUJITSU
scanner dealer or an authorized FUJITSU scanner service provider.
*2
Pre-moistened with Cleaner F1. It can be used instead of moistening
a cloth with Cleaner F1.
ATTENTION
●
In order to use the cleaning materials safely and correctly,
read the precautions on each product thoroughly.
●
It may take a long time to dry if an excessive amount of
Cleaner F1 is used. Use it in small quantity. Wipe off the
cleaner completely to leave no residue on the cleaned parts.
Print Section
Print Section
