9.
Copying of the program is started.
The following installation wizard page is displayed. The upgrade process is completed. Click Finish.
10.
Eject the DVD-ROM.
When the tasks described above have been performed, the upgrade of the AdvancedCopy Manager's agent is complete.
Refer to "
10.3.1.4 Tasks to Be Performed After Upgrade
" to setup the AdvancedCopy Manager's agent.
Point
If the Upgrade Installation has ended in an error, refer to "
11.3.5 In Case of Problem During Upgrade of AdvancedCopy Manager's Agent
" and return the system to a normal state.
10.3.1.3 Upgrade with Silent Installation Tasks
The upgrade is performed as follows:
1.
10.3.1.3.1 Performing Upgrade with Silent Installation Procedure
2.
10.3.1.3.2 Confirming Results of Upgrade with Silent Installation
10.3.1.3.1 Performing Upgrade with Silent Installation Procedure
Note that if step 1 and step 2 have already been performed, perform from step 3.
1.
Log on to the server using Administrator privileges.
2.
Insert the DVD-ROM "ETERNUS SF SC/ACM/Express Mediapack (Agent Program and Manual)" for this version into the DVDROM
drive. Furthermore, if the Installer screen is displayed by autorun, exit the installer.
3.
Start the command prompt with "Run as administrator".
4.
Install the AdvancedCopy Manager's agent.
In response to the architecture of the AdvancedCopy Manager's agent confirmed at the operation before upgrade, execute the
commands for silent installation below to install.
- 220 -