Fujitsu ETERNUS SF Express V16.6 Скачать руководство пользователя страница 137 | Manualshive

Страница: 137 / 378

Fujitsu ETERNUS SF Express V16.6 Скачать руководство пользователя страница 137

The Storage Cruiser's agent upgrade is completed.

Refer to "

7.4.4 Tasks to Be Performed After Upgrade

" to set up the Storage Cruiser's agent.

Point

-

If the upgrade was terminated abnormally, refer to "

11.3.4 In Case of Problem During Upgrade of Storage Cruiser's Agent (for

Solaris, Linux)

" to recover the system to the normal state.

-

Once normal operation has been confirmed after the upgrade of the Storage Cruiser's agent, the backup data in the backup
destination directory created in step 5 of "

7.4.1.1 Backing Up Operational Environment of Previous Version

" maybe deleted.

7.4.3 Upgrade with Silent Installation Tasks

The upgrade is performed as follows:

1.

7.4.3.1 Performing Upgrade with Silent Installation Procedure

2.

7.4.3.2 Confirming Results of Upgrade with Silent Installation

7.4.3.1 Performing Upgrade with Silent Installation Procedure

1.

Execute the following command.

dvdromMountPoint/Agent_unix/Storage_Cruiser/Solaris/scagtsilentinstall.sh [-l <installLogFile >]

2.

On completion of installation, a command prompt is displayed.

3.

Eject the DVD-ROM.

# umount dvdromMountPoint

Point

-

If nothing is specified for

installLogFile

, an install log file named "scagtsilentinstall.log" is created in the /var/tmp directory.

-

If there is any file of the same name as the specified install log file, it is overwritten.

-

It is required to specify an existing directory with write permission for the directory in which to store the install log file. If it has no
write permission, no error message is output in the command prompt or screen and the process terminates with error.

Note

-

If an invalid option is specified, its corresponding error message is output in the install log file and the process exits. No error
message is output in the command prompt or screen.

-

Do not execute multiplexly the command for silent installation. If it is multiplexly executed, the command executed after that
terminates abnormally. At this time, an install log file is not created.

-

During an update, it is not possible to specify an installation parameter file for the command. In the case that a file has been
specified, the command terminates in an error.

7.4.3.2 Confirming Results of Upgrade with Silent Installation

Check the return value from the silent installation command. If necessary, check the install log file. However, if the return value from
the silent installation command is 3 or 9, an install log file is not created. For details, refer to "Return Values for Silent Installation (for
Storage Cruiser's Agent)" in the

ETERNUS SF Installation and Setup Guide

.

- 113 -

«
...
135
136
137
138
139
...
»

Содержание ETERNUS SF Express V16.6



























































































































































































































































































































































































Отзывы:

Нет отзывов