Chapter 3 Configuration Settings and Display
3.1 Thin Provisioning Pool Management > set thin-pro-pool
ETERNUS CLI User’s Guide
Copyright 2015 FUJITSU LIMITED
P2X0-1030-09ENZ0
77
set thin-pro-pool
This command changes the information of an existing Thin provisioning pool (Thin provisioning pool name, a
Thin provisioning pool warning, and a Thin provisioning pool attention).
■
Syntax
■
Parameter
■
Example(s)
set thin-pro-pool {-pool-number
pool_number
| -pool-name
pool_name
} [-name
name
]
[-warning
warning
] [-attention
attention
]
-pool-number
or
-pool-name
This parameter specifies the Thin provisioning pool identifier. Only one Thin provisioning pool
identifier can be specified.
-name
Optional. This parameter specifies the new Thin provisioning pool name. If this parameter is
omitted, the name is not changed. For details, refer to
"1.2.4 Alias Name Syntax" (page 20)
.
-warning
Optional. This parameter specifies the warning level of the Thin provisioning pool. The settable
range is 5 – 99%. If this parameter is omitted, the warning level is not changed. The warning
level range should be equal to or higher than the "-attention" setting range.
-attention
Optional. This parameter specifies the attention level of the Thin provisioning pool. The
settable range is 5 – 80%. If this parameter is omitted, the attention level is not changed. The
attention level range should be equal to or lower than the "-warning" setting range.
The following example changes the Thin provisioning pool name from "TPP0001" to "TPP0010":
CLI> set thin-pro-pool -pool-name TPP0001 -name TPP0010
The following example changes the attention to 60% and the warning to 80% for Thin provisioning pool #02:
CLI> set thin-pro-pool -pool-number 02 -attention 60 -warning 80
Содержание Eternus DX410 S2
Страница 2: ...This page is intentionally left blank ...
Страница 756: ......