manualshive.com logo in svg

Fujitsu Eternus DX410 S2, Руководство пользователя CLI

Fujitsu Eternus DX410 S2 - надежное хранилище данных для вашего бизнеса. Получите бесплатное руководство пользователя CLI User's Manual для более эффективного использования этого устройства. Скачайте его с manualshive.com и легко освойте все возможности продукта. Надежность и качество от Fujitsu ждут вас!

Поделиться
Скачать
background image

Appendix A  Error Messages
    

ETERNUS CLI User’s Guide

Copyright 2015 FUJITSU LIMITED

P2X0-1030-09ENZ0

696

 

E0208

Competing with deleting Thin Provisioning Volume in background process.
A Thin Provisioning Pool is being deleted by another process. Wait for a while and try again.

E0209

Competing with formatting Thin Provisioning Volume in background process.
A Thin Provisioning Pool is being formatted by another process. Wait for a while and try again.

E0210

Competing with setting Thin Provisioning Volume parameters in background process.
The Thin Provisioning Pool parameters are being set by another process. Wait for a while and try again.

E0211

Competing with registering REC Disk Buffer Volume in background process.
An REC disk buffer volume is being registered by another process. Wait for a while and try again.

E0212

Competing with deleting REC Disk Buffer Volume in background process.
An REC disk buffer volume is being deleted by another process. Wait for a while and try again.

E0213

Competing with inhibiting copy destination volume in background process.
A copy destination volume is being protected by another process. Wait for a while and try again.

E0214

Competing with Thin Provisioning Pool migration in background process.
Thin Provisioning Pool Migration is being performed by another process. Wait for a while and try again.

E0215

Competing with setting cache size limit to volume in background process.
The cache size limit is being set by another process. Wait for a while and try again.

E0216

Competing with setting Offloaded Data Transfer Mode in background process.
The ODX mode is being set by another process. Wait for a while and try again.

E0300

Syntax error in REC path information. (Incorrect file header)
A syntax error was detected in the specified REC path information file. Specifically, the header identifier is 
incorrect. Check the output line given in the details of this message and amend the header identifier.

E0301

Syntax error in REC path information. (Version mismatch)
A syntax error was detected in the specified REC path information file. Specifically, the version 
information is mismatched. Check the output line given in the details of this message and amend the 
version information.

E0302

Syntax error in REC path information. (Incorrect label)
A syntax error was detected in the specified REC path information file. Specifically, the label name is 
incorrect. Check the output line given in the details of this message and amend the label name.

E0303

Syntax error in REC path information. (Incorrect operand)
A syntax error was detected in the specified REC path information file. Specifically, the operand name is 
incorrect. Check the output line given in the details of this message and amend the operand name.

E0304

Syntax error in REC path information. (Duplicate definition)
A syntax error was detected in the specified REC path information file. Specifically, the specified 
definitions are duplicated. Check the output line given in the details of this message and amend the 
incorrect definition.

E0305

Syntax error in REC path information. (Missing label)
A syntax error was detected in the specified REC path information file. Specifically, the required label 
names are missing. Check the output line given in the details of this message and add the required label 
names.

E0306

Syntax error in REC path information. (Too many labels)
A syntax error was detected in the specified REC path information file. Specifically, unnecessary label 
names exist. Check the output line given in the details of this message and delete any unnecessary label 
names.

Message

number

Message

Countermeasure for the error 

Содержание Eternus DX410 S2





















































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Eternus DX410 S2

IBM BladeCenter HS23 Service Manual preview
BladeCenter HS23
Бренд: IBM Страницы: 36
Garderos R-7700 Series Operating Manual preview
R-7700 Series
Бренд: Garderos Страницы: 23
Microdia MMCmobile Operating Manual preview
MMCmobile
Бренд: Microdia Страницы: 1
Quatech AirborneDirect ABDG-SE-IN5410 Quick Start Manual preview
AirborneDirect ABDG-SE-IN5410
Бренд: Quatech Страницы: 8
aizo digitalSTROM-Server Installation Notes preview
digitalSTROM-Server
Бренд: aizo Страницы: 2
3Com 3C13640 Installation Manual preview
3C13640
Бренд: 3Com Страницы: 32
IBM 7945G2U Installation And User Manual preview
7945G2U
Бренд: IBM Страницы: 194
Denios PolySafe Depot Type C User Manual preview
PolySafe Depot Type C
Бренд: Denios Страницы: 8
Addonics Technologies ST55HPMXU User Manual preview
ST55HPMXU
Бренд: Addonics Technologies Страницы: 9
Lantronix xPort Pro XPP1004000-02R Integration Manual preview
xPort Pro XPP1004000-02R
Бренд: Lantronix Страницы: 17
Cambium Networks PMP 450i User Manual preview
PMP 450i
Бренд: Cambium Networks Страницы: 172
Infotrend EonStor DS B Series Hardware Manual preview
EonStor DS B Series
Бренд: Infotrend Страницы: 157
RadioLabs O2Wind Instruction preview
O2Wind
Бренд: RadioLabs Страницы: 11
HP ProLiant BL460c Gen8 User Manual preview
ProLiant BL460c Gen8
Бренд: HP Страницы: 84
Zte ZXHN H368C User Manual preview
ZXHN H368C
Бренд: Zte Страницы: 25
Paradyne FrameSaver SLV 9820 Installation Instructions Manual preview
FrameSaver SLV 9820
Бренд: Paradyne Страницы: 20
Paradyne 6382 User Manual preview
6382
Бренд: Paradyne Страницы: 76
Paradyne FrameSaver SLV 9664 User Manual preview
FrameSaver SLV 9664
Бренд: Paradyne Страницы: 240

Бренды по названию

Популярные бренды

Загрузить еще бренды