Fujitsu ETERNUS AF650 S2, Основное руководство по эксплуатации

Страница: 19 / 59

●
Host Interface (for Copper Twinax Cable Connections) (2port)
The ports on the host interface are used for connecting a controller to a server with a Copper Twinax cable.
Figure 1.10 Host Interface for Copper Twinax Cable Connections (2port)
4 5
1 2 3
1. CA READY LED
2. CA FAULT LED
3. LINK/FAULT LED
4. Host Interface Port #0
5. Host Interface Port #1
The states of LEDs are listed below.
Table 1.4 Status and Meanings of Each LED (Host Interface)
LED name LED status Meanings
CA FAULT
(amber)
The host interface is in error status.
CA READY
(green)
The host interface is in normal status.
LINK/FAULT
(green)
The link between the host interface port and the destination port
has been established.
(amber)
The host interface port is in error status.
Chapter 1 Component Names and LED Names
1.1 Controller Enclosures
19
FUJITSU Storage ETERNUS AF650 S2, ETERNUS AF650 All-Flash Arrays Operation Guide (Basic)
Copyright 2017 FUJITSU LIMITED
P3AG-1932-04ENZ0