Fujitsu ETERNUS AB Series Скачать руководство пользователя страница 103

Страница: 103 / 107

| Host port protocol |

b) Select the host to which the port will be associated, and click

View/Edit Settings

The Host Settings dialog box appears.

c) Click the

Host Ports

tab.

d) Click

Add

, and use the

Add Host Port

dialog box to associate a new host port identifier to the host.

The length of the host port identifier name is determined by the host interface technology. FC host port

identifier names must have 16 characters. iSCSI host port identifier names have a maximum of 223

characters. The port must be unique. A port number that has already been configured is not allowed.

e) Click

Delete

, and use the

Delete Host Port

dialog box to remove (unassociate) a host port identifier.

The

Delete

option does not physically remove the host port. This option removes the association

between the host port and the host. Unless you remove the host bus adapter or the iSCSI initiator, the

host port is still recognized by the controller.

f) Click

Save

to apply your changes to the host port identifier settings.

g) Repeat these steps to add and remove any additional host port identifiers.

Reboot the host or perform a rescan so that the host properly discovers mapped storage.

Remount volumes or start using block volume.

What to do next

Your host protocol conversion is complete. You can resume normal operations.

Complete IB-iSER to/from IB-SRP, NVMe over InfiniBand, NVMe over RoCE conversion, or NVMe over Fiber

Channel

After you apply the feature pack key to convert the protocol used by your InfiniBand iSER HIC port to/from SRP,

NVMe over InfiniBand, NVMe over RocE, or NVMe over Fiber Channel you need to configure the host to use the

appropriate protocol.

Procedure
1.

Configure the host to use the SRP, iSER, or NVMe protocol.
For step-by-step instructions on how to configure the host to use SRP, iSER, or NVMe, see the

Linux Express

Configuration

To connect the host to the storage array for an SRP configuration, you must enable the InfiniBand driver

stack with the appropriate options.
Specific settings might vary between Linux distributions.

What to do next

Your host protocol conversion is complete. You can resume normal operations.

103

Содержание ETERNUS AB Series












































































































Результаты поиска

Содержание ETERNUS AB Series

Отзывы:

Похожие инструкции для ETERNUS AB Series

Бренды по названию

Популярные бренды

Fujitsu ETERNUS AB Series, Поддержание работоспособности оборудования

Результаты поиска

Содержание ETERNUS AB Series

Отзывы:

Похожие инструкции для ETERNUS AB Series

Бренды по названию

Популярные бренды