Fujitsu Esprimo P2 Series Скачать руководство пользователя страница 21

Страница: 21 / 61

Getting started

Installing the software

►

During installation, follow the on-screen instructions.

Software,

Installing,

►

Consult the operating system manual if there is anything unclear about the requested input data.

For further information about the system and its drivers, utilities and updates please
refer to the "Drivers & Utilities" DVD or visit our website at

"http://ts.fujitsu.com/support/"

Connecting external devices

Read the documentation on the external device before connecting it.

With the exception of USB devices, always remove all power plugs
before connecting external devices!

Do not connect or disconnect cables during a thunderstorm.

Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.

Connect and disconnect the cables in the order described below.

Connecting the cables

►

Turn off all power and equipment switches.

Cord

Cable,

►

Remove all power plugs from the grounded mains outlets.

►

Connect all the cables to the device and the external devices. Please make sure that you
always observe the safety notes provided in

"Important notes", Page 3

►

Plug all data communication cables into the appropriate sockets.

►

Plug all power cables into the grounded mains outlets.

USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.

Additional information can be found in

"Connecting external devices to the USB

ports", Page 15

and in the documentation for the USB devices.

Disconnecting the cables

►

Switch off all affected devices.

Cable,

►

Remove all power plugs from the grounded mains outlets.

►

Unplug all data communication cables from the appropriate sockets.

►

Disconnect all of the cables from the device and from the external devices.

A26361-K1007-Z220-1-7619, edition 1

Содержание Esprimo P2 Series






























































Результаты поиска

Содержание Esprimo P2 Series

Отзывы:

Fujitsu Esprimo P2 Series, Руководство по эксплуатации, Страница: 21 / 61

Результаты поиска

Содержание Esprimo P2 Series

Отзывы: