Fujitsu ESPRIMO Mobile V6555, Легкое руководство

Страница: 27 / 34

Removing and installing components during servicing
Removing and installing memory modules
Mainmemory Memoryexpansion Memoryupgrade Systemexpansion
Your notebook supports dual-channel DDR2 technology.
The dual-channel DDR2 technology can only be used with two identical memory
modules. When two different memory modules are installed, only "single-channel"
mode is supported. This reduces the performance of your notebook.
With a memory con fi guration of 4 GBytes, the visible and usable main memory
may be reduced to 3 GBytes (depending on notebook con fi guration).
If you are asked by the Hotline/Help Desk to remove and install the memory
modules yourself, proceed as follows:
Pay attention to the relevant safety notes provided in the "Important notes" chapter.
The notebook must be switched off when installing/removing the memory
modules, it must not be in Suspend mode.
Only use approved memory expansion modules in your notebook (see
Section
"Technical speci fi cation", Page 23 ).
Never use force when installing or removing memory modules.
Make sure that foreign objects do not fall into the memory expansion compartment.
Individual components (e.g. the processor heat sink) can become very hot
during operation. Therefore, we recommend that you wait one hour after
switching off the notebook before removing or installing the memory modules.
Otherwise, there is a risk of suffering burns!
As some non-ESD safe components are exposed, please observe the section "Notes
on installing and removing boards and components", Page 16
.
► Switch your notebook off and unplug the mains adapter from the mains outlet.
► Close the LCD screen so that it locks into place.
► Disconnect all cables connected to the notebook.
► Turn your notebook over and place it on a stable, fl at and clean surface. If necessary, lay
an anti-slip cloth on this surface to prevent the notebook from being scratched.
► Remove the battery (see "Removing the battery", Page 12 ).
A26391-K245-Z220-1-7619, edition 1 19