Fujitsu ESPRIMO E3520 Скачать руководство пользователя страница 32

Страница: 32 / 61

Problem solutions and tips

Cause

Remedy

Wrong monitor has been set under Windows 7

►

Restart the device.

►

Press

while the system is booting.

Either the

Windows Advanced Start Options

or the menu for selecting the operating system
appears.

►

If the menu for selecting the operating
system appears, press

►

Select

Safe Mode

Safe Mode with Network

►

Select

Start – Control Panel – Appearance and

Themes – Display

to set the correct values for

the connected monitor, as explained in the
monitor instructions.

The wrong RAM modules have been inserted

►

See the technical manual for the mainboard
for information on which memory modules
can be used.

No mouse pointer displayed on the screen

Cause

Remedy

The mouse is not correctly connected.

►

Shut down the operating system properly.

►

Switch the device off.

►

Check that the mouse cable is properly
connected to the system unit. If you use an
adapter or extension lead with the mouse
cable, check the connections.

►

Make sure that only one mouse is
connected.

►

Switch the device on.

The

oppy disk cannot be read or written

Cause

Remedy

The write protection of the

oppy disk or the

oppy disk drive is activated.

►

Check whether the write protection of
the

oppy disk or the

oppy disk drive is

activated (refer to the "BIOS Setup" manual
and if necessary to the manual for the
mainboard).

The

oppy disk drive controller is not enabled.

►

Check the relevant entries for

oppy disk

drive in the

Main

menu of the

BIOS Setup

►

Check that the

oppy disk drive controller

is enabled (refer also to the manual for the
mainboard or in the "BIOS Setup" manual).

The

oppy disk drive is not connected.

►

Check that the cables of the

oppy disk

drive are properly connected.

A26361-K1180-Z220-1-7619, edition 2

Содержание ESPRIMO E3520






























































Результаты поиска

Содержание ESPRIMO E3520

Отзывы:

Бренды по названию

Популярные бренды

Fujitsu ESPRIMO E3520, Руководство по эксплуатации

Результаты поиска

Содержание ESPRIMO E3520

Отзывы:

Бренды по названию

Популярные бренды