Fujitsu Esprimo D5210 Скачать руководство пользователя | Manualshive

Страница: 2 / 53

background image

ii

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions carefully. Save these instructions for future reference.

2. Follow all warnings and instructions marked on the product.

3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water.

5. Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious

damage to the product.

6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure

reliable operation of the product and to protect it from overheating, these openings must not be
blocked or covered. The openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should never be placed near or over a radiator or heat
register, or in a built-in installation unless proper ventilation is provided.

7. This product should be operated from the type of power indicated on the marking label. If you are

not sure of the type of power available, consult your dealer or local power company.

8. This product is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin.

This will only plug into a grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat
the purpose of the grounding-type plug.

9. Do not allow anything to rest on the power cord. Do not place this product where the power cord

can easily be stepped on.

10. If an extension cord is used with this product, make sure that the total ampere rating of the

equipment plugged into the extension cord does not exceed the extension cord ampere rating.
Also, make sure that the total rating of all products plugged into the wall outlet does not exceed
15 amperes.

11. Never push objects of any kind into this product through cabinet slots as they may touch dangerous

voltage points that could result in a fire or electric shock. Never spill liquid of any kind on the product.

12. Do not attempt to service this product yourself, as opening or removing covers may expose you

to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

«
1
2
3
4
...
»

Содержание Esprimo D5210






















































Отзывы:

Нет отзывов

Похожие инструкции для Esprimo D5210

DECstation 316+

Бренд: DEC Страницы: 94

Бренд: IBASE Technology Страницы: 19

ARK-3531 Series

Бренд: Advantech Страницы: 84

Бренд: Vecow Страницы: 33

Бренд: XPLORE TECHNOLOGIES Страницы: 2

Бренд: Foxconn Страницы: 2

Бренд: HP Страницы: 108

Bc1500 - BladeSystem - Blade PC

Бренд: HP Страницы: 149

Compaq 18 All-in-One

Бренд: HP Страницы: 13

Compaq d538 CMT

Бренд: HP Страницы: 80

Бренд: HP Страницы: 7

Compaq dc7800 MT

Бренд: HP Страницы: 102

Бренд: HP Страницы: 105

Бренд: HP Страницы: 22

Compaq dc7800 Series

Бренд: HP Страницы: 276

Compaq dc7700 Ultra Slim Desktop (USDT) Business

Бренд: HP Страницы: 10

compaq d538 Series

Бренд: HP Страницы: 2

Compaq 8200 Elite Series

Бренд: HP Страницы: 65

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды