Installation guide for Fujitsu Dot Matrix Printer_1.6
Page 35
Pre-setup Before Sample Test Print on Cathay Pacific (GalaCXy) Workstations
Note:
Only perform the following steps if you are installing on a Cathay Pacific Workstation (i.e.
GalaCXy PC). If you are in doubt please check with the local outport contact person for
confirmation.
If you have not already done so, logon the computer using an account with local administrator rights.
Click on “Logon Workstation Only”.
CX “local administrator“ Username and Password:
GalaCXy ID
Password
SPF#PRI01
spfpri01
SPF#PRI02
spfpri02
1.
Open the CASPOL.ZIP file downloaded in “
Prerequisites for Fujitsu engineer
”
section.(Alternate internet download link :
http://ftp.fhk.com.hk/Download/CASPOL.zip
)
Unzip the
CASPOL.ZIP
file into drive C (MUST unzip into C:\, folder name called
CASPOL
), the folder
location and files must be the same as below, otherwise the batch files cannot be run successfully.
