background image

iii

13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under

the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c.

If the product has been exposed to rain or water.

d. If the product does not operate normally when the operating instructions are followed. Adjust

only those controls that are covered by the operating instructions since improper adjustment
of other controls may result in damage and will often require extensive work by a qualified
technician to restore the product to normal condition.

e. If the product has been dropped or the cabinet has been damaged.
f.

If the product exhibits a distinct change in performance, indicating a need for service.

14. Use only the proper type of power supply cord set (provided in your accessories box) for this unit.

It should be a detachable type: UL listed/CSA certified, BS1363, ASTA, SS145 certified, rated
10A 250V minimum, VDE approved or its equivalent. Maximum length is 15 feet (4.6 meters).

15. NOTE:

Please take extra precaution when connecting the LAN cable; do not connect the LAN cable
to the peripheral device’s connector, that might have excessive voltage.

Welli2 (0-INTRO)

15/12/04, 10:27 AM

3

Содержание DESKPOWER P321























































Отзывы: