Fujitsu DESKPOWER 500 Series, Руководство пользователя

Страница: 14 / 80

3
1 Power lamp
This lamp lights up when the PC is on.
It lights up in green when the PC is in operation and in orange when the PC is in the standby (power-
saving) mode.
2 Power switch
Press this switch to turn on the PC or set the system to the standby mode.
3 Hard disk access lamp
This lamp lights up while the hard disk is accessed.
4 Floppy disk eject button
Press this button to remove a floppy disk from the floppy disk drive.
Do not press this button when the Floppy disk drive access lamp is on.
5 Floppy disk drive
This drive accommodates a floppy disk for writing and reading data.
6 Floppy disk drive access lamp
This lamp lights up while the floppy disk drive is accessed.
7 Volume
Use this control to adjust the volume of the speaker or headphones.
Turn this control upward to increase or downward to decrease the volume.
8 Headphone jack
When listening to sound output from the PC or a music CD with headphones, plug them to this
jack.
9 Microphone jack
Plug a capacitor microphone to this jack.
10 USB connector
11 Eject button
Press this button to insert or remove a CD-ROM or music CD. This button can be used when the
PC is on. Do not press this button when the Busy lamp is on.
12 CD-ROM drive
Insert a CD-ROM into this drive to read data or programs, or insert a music CD for playback.
13 Busy lamp
This lamp lights up while data is read from the CD-ROM drive or a music CD is played.
14 Headphone volume (only for music CDs)
Use this control to adjust the volume of headphones.
15 Headphone jack (only for music CDs)
When listening to a music CD with headphones, plug them to this jack.
16 Front access bay
Use this bay to install an optional 3.5-inch device.
17 Smart Card bay
Use this bay to install a Smart Card reader/writer.
18 Foot
Used for placing the PC.
This also prevents the PC in a vertical placement from tipping over.