Fujitsu D2863, Техническое руководство

Страница: 17 / 36

D2863 (RX100 S6)
Technical Manual 17
3 Features
3.1 Overview
Processors
– one processor socket LGA1156
– one Intel
®
Quad-Core processor of the Intel Xeon 3400 series (up to 95 W)
or one Intel
®
Dual-Core processor (Celeron, Pentium or Core-i3)
Main memory
– 4 slots for main memory; CPU supports 2 channels with 2 DIMM slots
– UDIMM (unbuffered DIMM) or RDIMM (registered DIMM) memory modules,
RDIMM memory modules are configurable for Xeon CPUs only
– minimum memory configuration: one DIMM in DIMM1A
– maximum memory configuration: UDIMM memory modules 16 GB, RDIMM
memory modules 32 GB (technical release pending)
– ECC multiple bit error detection and single bit error correction
Chips on the system board
– Intel
®
BD3420 PCH chip set
– Gigabit Ethernet controller Intel 82574 (shared LAN)
– Gigabit Ethernet controller Intel 82578 (system LAN)
– 4 MB Flash BIOS
– onboard iRMC S2 Server Management Controller with integrated graphics
controller and associated management LAN connector
Internal connectors
– 5x SATA connectors
– 1x I
2
C signaling connector for LocalView Service Panel (optional)
– 1x I
2
C signaling connector for SATA backplane
– 1x power connector 24 pin (12V)
– 1x backplane power connector 8 pin
– 1x connector for fans and ODD
– 1x front panel connector
– 1x front USB connector (for the two USB connectors on the front side)
– 1x connector for optional Front VGA module