Fujitsu D2785, Техническое руководство

Страница: 18 / 34

18 Technical Manual
D2785 (TX120 S2)
Screen resolution Features
The following interrupt signals are used in the system:
Assignment of the PCI interrupts
If you select Auto in the BIOS setup, the interrupts are assigned automatically
and no further settings are required.
3.4 Screen resolution
Depending on the operating system used the screen resolutions in the following
table refer to the Matrox graphic controller on the system board. The Matrox
graphic controller is integrated in iRMC S2 (integrated Remote Management
Controller).
If you are using a different graphic controller, you will find details of supported
screen resolutions in the documentation supplied with the graphic controller.
Slot/device Property Interrupt signal
VGA iRMC S2 graphic Int B
LAN Intel 82567 LM Int A
Slot 1 PCIe x8 Int A, B, C, D
Slot 2 PCIe x8 Int A, B, C, D
Slot 3 PCI (33 MHz) Int A, B, C, D
Slot 4 PCIe x8 Int A, B, C, D
Screen resolution Maximal refresh rate (Hz) Maximal colour depth
640x480 85 32 Bit
800x600 85 32 Bit
1024x768 85 32 Bit
1152x864 75 24 Bit
1280x1024 60 24 Bit