26
Technical Manual
D2109 (TX200 S3)
Interfaces and connectors
Features
3.7.1
External ports
Figure 6: External ports of the system board D2109
The serial interface COM1 can be used as default interface or to communicate
with the iRMC.
LAN connectors
On this system board you will find two LAN controllers: a single-channel Gigabit
LAN controller and a service LAN controller.
The single-channel Gigabit LAN controller supports the transfer rates of
10 Mbit/s, 100 Mbit/s and 1 Gbit/s. The Service LAN controller supports the
transfer rates of 10 Mbit/s and 100 Mbit/s.
The LAN controllers support WOL function through Magic Packet™.
It is also possible to boot a device without its own boot hard disk via LAN. Here
Intel PXE is supported.
The LAN1 port serves as management interface and is prepared for
RemoteView.
1 = PS/2 mouse connector
6
= VGA port
2 = serial interface COM2
7
= serial interface COM1
3 = USB ports 3 and 4
8
= PS/2 keyboard connector
4 = LAN connector 2
9
= ID LED
5 = LAN connector 1 (service LAN)
10 = Global Error LED
3
5
6
2
8
7
1
4
9
10
