Fujitsu CW35 Series Скачать руководство пользователя страница 74

Страница: 74 / 85

Supported Softwares

5. The Readme Information screen will appear. You can view the

content of the utilitys readme in this screen. Click Next.

6. The Choose Destination Location screen will appear showing

where the utility will be located. Click Next.

7. The Actions screen will appear. Click Next to install the utility.

8. Restart the system.

9. Follow the prompts on the screen to continue with the

installation.

Note:

If you are using Windows



95B and you want to use the USB

device, you must first install the USBSUPP program before

installing the INF Update. Please contact Microsoft for this

program.

4.4 Installing the Graphics Driver

1. Insert the CD into a CD-ROM drive. The autorun screen (Main

Board Utility CD) will appear.

2. Click Graphics Driver.

3. The Welcome screen will appear. Click Next.

4. The Software License Agreement screen will appear. Click Yes.

5. Choose the destination you would like the driver located then

click Next to start installing the driver.

6. Click Finish.

7. The system will restart.

4.4.1 Windows 2000 VGA Driver Installation Notes

The Windows 2000 VGA driver auto-installation function is not

supported. To install the driver, please follow Windows VGA

installation procedures. If you need the "I81XNT5.INF" file, please

locate the file in "VgaDrv\Win2KCD\Win2000\" that is contained in

the CD included in the system board package.

Содержание CW35 Series






















































































Результаты поиска

Содержание CW35 Series

Отзывы:

Похожие инструкции для CW35 Series

Бренды по названию

Популярные бренды

Fujitsu CW35 Series, Руководство пользователя

Результаты поиска

Содержание CW35 Series

Отзывы:

Похожие инструкции для CW35 Series

Бренды по названию

Популярные бренды