Fujitsu celvin nas, Руководство по эксплуатации

Страница: 19 / 75

Installing the NAS
Fujitsu 13
Beep sound No. of Times Description
2
● The disk volume is going to be full.
● The disk volume has reached its full
capacity.
● The hard disk drives on the NAS are in
degraded mode.
● The user starts hard drive rebuilding.
Long beep (1.5 sec)
1
● The NAS is turned off by force shutdown
(hardware shutdown).
● The NAS has been turned on and is
ready.
Use the LCD Panel
You can use the LCD panel to perform disk configuration and view the system information.
When the NAS has started up, you will be able to view the NAS name and IP address:
N A S 5 F 4 D E 3
1 6 9 . 2 5 4 . 1 0 0 . 1 0 0
For the first time installation, the LCD panel shows the number of hard drives detected and the IP
address. You may select to configure the hard drives.
Number of
hard drives
detected Default disk
configuration Available disk configuration options
1 Single Single
2 RAID 1 Single  JBOD  RAID 0  RAID 1
3 RAID 5 Single  JBOD  RAID 0  RAID 5
4 or above RAID 5 Single

JBOD

RAID 0

RAID 5

RAID 6

RAID 10
i
Press the Select button to choose the option.
Press the Enter button to confirm.
For example, when you switch on the NAS with 5 hard disks installed, the following message is
displayed on the LCD panel:
C o n f i g . D i s k s ?