Fujitsu CELSIUS M4 Series, Руководство по эксплуатации

Страница: 27 / 94

Operation
A26361-K994-Z220-1-7619, Edition 2 19
LAN connection
Appears on the LCD as soon as the workstation is connected to a LAN.
LAN access
Appears on the LCD as soon as the workstation sends or receives data over the
LAN.
Message
When software that supports this function is used, the appearance of this symbol on
the display indicates that an incoming message (mail, fax) is waiting.
Appears on the LCD when an incoming message (mail, fax) is waiting. This symbol
only appears if you use software that supports this function.
Date
The current date and the calendar symbol are shown on the LCD.
USB
Appears on the LCD when a USB port was activated in the function
USB Security
in
BIOS and the device connected to this port is removed during operation. This
prevents another device from being connected.
The symbol disappears again after the system is rebooted.
Time
The current time and the time symbol are shown on the LCD.
Drive indicator, e.g. DVD
The indicator lights up when the CD-ROM or DVD drive of the device is accessed. You must never
under any circumstances remove the CD/DVD while the indicator is lit.
Power-on indicator
● The indicator glows white:
The device is switched on.
i
The display can also glow white if the device has been switched off by holding
the ON/OFF switch pressed for an extended period of time (see
"Troubleshooting and tips").
● The indicator flashes white:
The device is in energy-saving mode. After being switched on with the ON/OFF switch, the
device powers up or returns to the state it was in before it entered energy-saving mode.
!
In energy-saving mode the device must not be disconnected from the mains supply,
otherwise data loss may occur.
● The indicator is not illuminated:
The device is switched off or is in hibernate mode. The device may be disconnected from the
mains supply.