26
3.5 How do I open or close a BS2000 dialog?
Requirement
Login into the SE Manager as administrator, BS2000 administrator or a privileged operator.
The BS2000 system has started up and BS2000's data communication system has started.
Procedure
>
Iconize the opened console window and switch once more to the main window of the SE Manager. That is
where the
tab of the BS2000 system which was previously started was most recently opened (take
Operation
note of
"Logging out because of a session timeout"
>
In the
group, click
by the
function.
Console and dialog
Open
BS2000 dialog
A BS2000 dialog window opens and requests the login to the BS2000 system:
After you have logged in successfully using the /SET-LOGON-PARAMETERS command, you can enter commands
and perform your tasks in BS2000.
Terminating a BS2000 dialog and closing the dialog window
Proceed as follows to close the dialog window:
>
Terminate your dialog task using the /EXIT-JOB command (or /LOGOFF).
BS2000 terminates your task and the connection to BS2000 is cleared.
>
Respond to the request
by pressing the Enter key.
PLEASE ACKNOWLEDGE
To complete an entry, click the DUE1 key in the key panel of the virtual keyboard or press the Enter key
on your keyboard.
i
Содержание BS2000 SE Series
Страница 4: ...4 Quick Guide ...
Страница 17: ...17 ...
