Getting Ready
35
d
Make sure the notification LED turns in red
When charging ends, the LED turns off.
e
Remove the power plug of the Fujitsu AC
adapter from the outlet after charging is
complete
f
Hold the microUSB plug to pull out straight
and close the external connection terminal
cover
◎ Alternatively, you can connect the ISW13F and a PC with a
microUSB cable 01 (sold separately) to charge. When a screen for "
新しいハードウェアの検索ウィザードの開始 (new hardware detection)"
appears on the PC, select "キャンセル (Cancel)".
◎ Firmly close the external connection terminal cover after charging to
avoid ingress of water or dust. (
X
P.30 "Closing external connection
terminal cover/stereo earphone terminal cover")
a
Press
C
for over 2 seconds
The notification LED turns in green and the ISW13F vibrates
once. The lock screen appears after a while.
b
Slide right on the lock screen
The screen is unlocked and the home screen appears.
◎ "はじめに (Getting started)" screen appears for the first time you
turned the power on.
◎ When you press
M
or
for the first time, a guide for operations
appears. Mark "Don't display again" not to show the screen after
that time.
a
Press and hold
C
until the phone option menu
appears.
b
"Power Off"
→
"OK"
You can switch the display language for function names and
other items to English.
a
In the home screen,
M
→
"本体設定
(Settings)"
→
"言語と入力 (Language & input)"
b
"Language"
→
"English"
Press
A
to skip the Japanese initial setting screen to
switch language to English. And then turn the power off and
on. "Getting started" screen appears. Tap "Complete Setting"
to display au Easy Setting screen. Follow the onscreen
instructions to make settings.
a
Set up "Google account"
b
Set up "Setting my body"
c
Set up "Lost device protection"
Turning the power on/off
Turning the power on
Turning the power off
Switching the display language to
English
Initial settings