12
SYSTEM OPERATION
There are different ways the unit can be controlled. (Consult the remote controller operating instructions for details on setting
the operating functions).
<Spare Remote Controller>
Two remote controllers can be connected to one air condi-
tioner unit. The air conditioner operation contents are the
remote controller setting contents set later.
(Both remote controllers show the same display.)
<Control Several Units with just one Remote Controller>
One remote controller can control up to 16 air conditioners.
All the air conditioners can be operated with the same set-
ting.
To Use the ZONE CONTROL
When the ZONE CONTROL button is pressed while multiple air condition-
ers are being centralized controlled, only the preset air conditioners stop.
Press the ZONE CONTROL button.
Preset units will stop.
To Stop the ZONE CONTROL
Press the ZONE CONTROL button one more time.
Those units that were stopped will start again.
NON STOP
OFF ON
CLOCK
TEMP.
OFF
ON
ON
OFF
TIMER
TIMER
PROGRAM
FAN AUTO
HEAT
FAN
COOL
DEFROST
FAN HIGH
FAN MED
FAN LOW
REPEAT
TIMER
MODE
CLOCK ADJUST
SET
TIME
FAN
CONTROL
MASTER
CONTROL
SET
TEMP.
ENERGY
SAVE
START
STOP
ZONE
CONTROL
°
TEST
Auto Restart
When the air conditioner power was temporarily turned off by a power
failure, etc., it will restart automatically after the power recovers. (Oper-
ated by settings before the power failure.)
Unit No.1
Unit No.2
Unit No.16
