background image

En-3

 CAUTION

•  To prevent malfunction or damage of the remote 

controller:

- Place remote controller at where will not be 

exposed to direct sunlight or excessive heat.

- Remove batteries if the product is not going to be 

used for an extended period.

•  Obstacles such as a curtain or wall between the 

remote controller and the indoor unit may a

 ect the 

appropriate signal transmission.

•  Do not apply strong shocks to the remote controller.
•  Do not pour water on the remote controller.

3.2. Remote controller

When you use the optional remote controller, the appearance 

and the operation procedure may di

 er.

For details, please refer to the operation manual of each remote 

controller.

: The setting must be done while the setting screen is displayed 

for each function.

: The button is controllable only when the air conditioner is 

operating.

: The instruction is relating to the wireless LAN control.

For Energy saving operation  ........ Refer to page 7.

Activates or deactivates the Economy 

operation.

Activates or deactivates the Energy saving 

program that uses the human sensor.

For Basic operations  ..................... Refer to page 5.

Starts or stops the air conditioner operation.

Changes the operation mode. 

Adjusts the setting temperature.

For Outdoor Unit Low Noise operation

 ... Refer to page 8.

Activates or deactivates the Outdoor Unit Low 

Noise operation.

Remote controller display

In this section, all the possible indicators are displayed for description. 
In actual operation, the display is linked with the button operation, and 
only shows the necessary indicators for each setting.

 Do not press this button in normal use.

It starts the test run (for use by authorized service personnel only).

NOTES:

If the test run starts unintentionally, press   to quit the test 

run.

Signal transmitter

Aim at the signal receiver of the indoor unit properly. 

• Operating range is approximately 22 ft (7 m).

• [   ] will appear when the signal is transmitted.

• The indoor unit will emit a beep when it receive the signal 

properly. If there is no beep, press the button again.

For Min. (Minimum) Heat operation

 ..... Refer to page 8.

Activates the Min. Heat operation.

9387602098̲OM.indb   3

9387602098̲OM.indb   3

2022/09/26   19:41:38

2022/09/26   19:41:38

Содержание Airstage Wall Series

















Отзывы: