En-1
1. SAFETY PRECAUTIONS
• The “SAFETY PRECAUTIONS” indicated in the manual contain impor-
tant information pertaining to your safety. Be sure to observe them.
• For details of the operation method, refer to the operating manual.
• Request the user to keep the manual on hand for future use, such as for
relocating or repairing the unit.
WARNING
Indicates a potentially or imminently hazardous situ-
ation which, if not avoided, could result in death or
serious injury.
Installation of this product must be done by experienced service techni-
cians or professional installers only in accordance with this manual.
Installation by nonprofessional or improper installation of the product
may cause serious accidents such as injury, water leakage, electric
shock, or
fi
re. If the product is installed in disregard of the instructions in
this manual, it will void the manufacturer’s warranty.
Installation must be performed in accordance with regulations, codes,
or standards for electrical wiring and equipment in each country, region,
or the installing place.
Do not operate this unit when your hands are wet. Touching the unit with
wet hands will cause an electric shock.
When children can approach the unit or touch the unit, take preventive
measures.
Dispose of the packing materials safely. Tear and dispose of the plastic
packing bags so that children cannot play with them. There is the dan-
ger of suffocation if children play with the original plastic bags.
CAUTION
Indicates a potentially hazardous situation that may
result in minor or moderate injury or damage to
property.
When detecting the room temperature using the remote controller,
please set up the remote controller according to the following conditions.
If the remote controller is not well set, the correct room temperature will
not be detected, and thus the abnormal conditions like “not cool” or “not
heat” will occur even if the air-conditioner is running normally. :
• A location with an average temperature for the room being air condi-
tioned.
• Locate where is not be affected by in
fl
ow of outside air such as caused
by opening and closing a door.
• Not directly exposed to the outlet air from the air conditioner.
• Out of direct sunlight.
• Away from the in
fl
uence of other heat sources.
REMOTE CONTROLLER
(WIRED TYPE)
INSTALLATION MANUAL
PART No. 9373328445
For authorized service personnel only.
[Original instructions]
Installation by endusers or not quali
fi
ed persons can cause harm to
personal safety, can cause severe damage to building and product, can
lead to improper function or reduced lifetime of the equipment.
Do not install the unit in the following areas:
• Do not install the unit near a source of heat, steam, or
fl
ammable gas.
Otherwise,
fi
re could result.
• Area
fi
lled with mineral oil or containing a large amount of splashed oil
or steam, such as a kitchen. It will deteriorate plastic parts, causing the
parts to fall.
• Area containing equipment that generates electromagnetic interfer-
ence. It will cause the control system to malfunction, and cause er-
roneous operation.
• Install the unit in a well-ventilated place avoiding rains and direct sun-
light.
Do not touch the switches with sharp objects. Doing so will cause injury,
trouble, or electric shock.
Do not expose this unit directly to water. Doing so will cause trouble,
electric shock, or heating.
Do not set vessels containing a liquid on this unit. Doing so will cause
heating,
fi
re, or electric shock.
2. MAIN UNIT AND ACCESSORIES
The following installation parts are supplied. Use them as required.
Name and shape
Q’ty
Name and shape
Q’ty
Wired remote controller
1
CD-ROM
1
Installation manual
(This manual)
1
Screw (M4 × 16mm)
For installing the remote
controller
2
Operating manual
1
Cable tie
For binding remote
controller and remote
controller cable
1
3. ELECTRICAL REQUIREMENT
When connecting the remote controller use the following wiring.
Cable type
Size
Remarks
Sheathed cable
0.33 to
1.25 mm²
Non polar 2 core,
Twisted pair
Shielded cable*
* Use shielded cable in accordance with local rules for remote controller
cable.
Select a
fl
exible cable that can be bound using cable ties from over the
cable sheath inside this unit.
Maximum connectable number of remote controllers by cable size and the
length.
Cable size
Max. connectable number of
remote controllers
AWG
mm²
L*
≤
100 m
101 m < L*
≤
250 m
251 m < L*
≤
500 m
VRF RAC VRF RAC VRF RAC
16
1.25
4
2
4
2
4
2
18
0.75 (1.25 > S*
≥
0.75)
4
2
4
2
2
2
20
0.5 (0.75 > S*
≥
0.5)
4
2
2
2
2
2
22
0.3 (0.5 > S*
≥
0.3)
4
2
1
1
1
1
*L: Total cable length, *S: Cable size
Deutsch
Français
Español
Italiano
E
λλη
vIk
ά
Português
Ру
сский
Türkçe
English
CONTENTS
1. SAFETY
PRECAUTIONS
.........................................................................1
2. MAIN UNIT AND ACCESSORIES ............................................................1
3. ELECTRICAL
REQUIREMENT
................................................................1
4.
SELECTING AN INSTALLATION LOCATION ..........................................2
5.
INSTALLING THE REMOTE CONTROLLER ...........................................2
6. SETTING THE REMOTE CONTROLLER ................................................5
7. TEST
RUN
................................................................................................9
8. ERROR
CODES
.......................................................................................9