manualshive.com logo in svg

Fujitsu AD11, Руководство пользователя

Поделиться
Скачать
Fujitsu AD11 Скачать руководство пользователя страница 55

3 - 19

BIOS Setup

ACPI function

This item allows you to disable the ACPI function.
The options are: Enabled, Disabled.

ACPI Suspend Type

This item allows you to select ACPI suspend types.
The options are: S1(POS), S3 (STR).

Power Management

This item allows you to adjust the power management features.Select User
Define for configuring your own power management features. Min Saving
initiates all predefined timers in their minimum values. Max Saving, on the
other hand, initiates maximum values.
The options are: User Define, Min Saving, Max Saving.

Video Off Method

The option 

V/H SYNC+Blank 

allows the BIOS to blank off screen display

by turning off the V-Sync and H-Sync signals sent from add-on VGA card.

DPMS Support

 allows the BIOS to blank off screen display by your add-

on VGA card which supports DPMS (Display Power Management Signal-
ing function). 

Blank Screen 

allows the BIOS to blank off screen display by

turning off the red-green-blue signals.
The options are: Blank Screen, V/H SYNC+Blank, DPMS Support.

Standby Mode

When disabled, the system will not enter Suspend mode. The specified
time option defines the idle time the system takes before it enters Suspend
mode. The options are: Disabled, 30 Sec,1, 4, 10, 20, 30 Min, 1 Hour.

HDD Power Down

The option lets the BIOS turn the HDD motor off when system is in Sus-
pend mode. Selecting 1 Min..15 Min allows you define the HDD idle time
before the HDD enters the Power Saving Mode.
The options 1 Min..15 Min will not work concurrently. When HDD is in the
Power Saving Mode, any access to the HDD will wake the HDD up.
The options are: Disabled, 1 Min..15 Min.

Содержание AD11

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды