manualshive.com logo in svg

Fujitsu AD11, Руководство пользователя

Поделиться
Скачать
Fujitsu AD11 Скачать руководство пользователя страница 45

3 - 9

BIOS Setup

AGP Aperture Size (MB)

It allows you to select the main memory frame size for AGP use.
The options are 32, 64, 128, 256.

Video RAM Cacheable

When enabled, allows the video RAM area to be cacheable.
The options are: Enabled, Disabled.

System BIOS Cacheable

When enabled, allows the ROM area F000H-FFFFH to be cacheable when
cache controller is activated. The options are: Enabled, Disabled.

Video BIOS Cacheable

As with caching the system BIOS above, enabling the video BIOS cache
will cause access to the video BIOS addressed at C0000H-C7FFFH to be
cached, if the cache controller is also enabled.
The options are Enabled, Disabled.

Memory Hole At 15M-16M

When you install a Legacy ISA card, this feature allows you to select the
memory hole’s address range of the ISA cycle when the processor ac-
cesses the selected address area. Please read your card manual for detail
information. When disabled, the memory hole at the 14MB (or 15MB)
address will be treated as a DRAM cycle when the processor accesses the
15~16MB address area. The options are: Enabled, Disabled.

AGP ISA Aliasing

It allows you to set the AGP decode capability like ISA slot.
The options are: Enabled, Disabled.

AGP Secondary Lat Timer

It allows you to set the latency delay time of AGP interface.
The options are: 00h, 20h, 40h, 60h, 80h, C0h, FFh.

Содержание AD11

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды