background image

En-3

■ 

Energy saving and Comfortable function

INVERTER

At the start of operation, large amount of power is used to 

bring the room quickly to the desired temperature. Afterwards, 

the unit automatically switches to a low power setting for eco-

nomic and comfortable operation.

ECONOMY OPERATION

When ECONOMY operation mode is operated, the room tem-

perature will be little higher than the set-temp under cooling 

mode and lower than set-temp under heating mode. Therefore, 

the ECONOMY mode is able to save more energy than other 

normal mode.

OMNI-DIRECTIONAL AIR FLOW 
(SWING OPERATION)

3-dimensional control over air direction swing is possible 

through dual use of both an up/down air direction swing and 

right/left air direction swing. Since up/down air direction 

fl

 aps 

operate automatically according to the operating mode of the 

unit, it is possible to set air direction based on the operating 

mode.

SUPER QUIET OPERATION

When the FAN button is used to select QUIET, the indoor unit 

begins super quiet operation; the indoor unit’s airflow is re-

duced to produce quieter operation.

AUTO CHANGEOVER

The operation mode (cooling, dry, heating) is switched auto-

matically to maintain the set temperature, and the temperature 

is kept constant at all times.

10°C HEAT OPERATION

The room temperature can be maintained at 10°C so as to 

prevent the room temperature from falling too far.

■ 

Convenient function

PROGRAM TIMER

The program timer allows you to integrate OFF timer and ON 

timer operations in a single sequence. The sequence can in-

volve 1 transition from OFF timer to ON timer, or from ON 

timer to OFF timer, within a 24 hour period.

SLEEP TIMER

When the sleep timer button is pressed during heating mode, 

the air conditioner’s thermostat setting is gradually lowered 

during the period of operation; during cooling or dry mode, 

the thermostat setting is gradually raised during the period of 

operation. When the set time is reached, the unit automatically 

turns off.

■ 

Clean function

REMOVABLE INTAKE GRILLE

The indoor unit’s intake grille can be removed for easy clean-

ing and maintenance.

■ 

Remote controller

WIRELESS REMOTE CONTROLLER

The wireless remote controller allows convenient control of air 

conditioner operation.

WIRED REMOTE CONTROLLER (OPTION)

The optional wired remote controller can be used.

When you use remote controller, there are following different 

points as compared with using wireless remote controller.

[The additional functions for wired ones]

• Weekly timer

• Temperature set back timer

And you can use both wired and wireless remote controller si-

multaneously.

(But function is limited)

When the restricted functions on the remote controller are 

used, beeping sound will be heard, OPERATION, TIMER and 

the 3rd lamp of the indoor unit will 

fl

 ash.

[The restricted functions for wireless ones]

• SLEEP timer

• TIMER (ON timer, OFF timer and Program timer)

• 10°C HEAT operation

 

This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless 

they have been given supervision or instruction concerning use of the appliance by 

a person responsible for their safety.

  Children should be supervised to ensure that they do not play with the appliance.

 

If you see lightning or hear thunder, there might be a lightning strike. To prevent 

electric shock hazard, turn off the air conditioner by using the remote controller, and 

do not touch the unit or the power plug during thunderstorm.

 

Do not place any other electrical products or household belongings under indoor 

unit or outdoor unit. Dripping condensation from the unit might get them wet, and 

may cause damage or malfunction of your property.

 

Keep clean and tidy around the outdoor unit, and do not place the things around it. If it 

is covered with fallen leaves, there could be an in

fi

 ltration of small animals or insects 

whose contact with the internal electrical components leads to the product malfunction.

 

Do not stand on unstable steps when operating or cleaning the air conditioner. It may 

overturn and can cause the injury.

SAFETY PRECAUTIONS

CAUTION

FEATURES AND FUNCTIONS

9374379729_OM.indb   3

9374379729_OM.indb   3

24/06/2013   09:41:17

24/06/2013   09:41:17

Содержание ABYG18LVTB



















Отзывы: