Perform the setting during the operation is stopped.
1
When [Menu button] is pressed twice while “Monitor” screen is dis-played,
it switches to the “Submenu” screen.
If [Menu button] is pressed while the “Submenu” screen is displayed,
the display returns to the “Monitor” screen.
Back:
Setting:
Date and time
Submenu
[
1/2
]
Monitor
Screen
Filter sign
R.C. sensor control
Room temp. display
Off
Off
Mo 10:00
2
Press the [Screen switch button (Left)] and [Screen switch button (Right)] simultaneously
for 5 seconds to switch to “Service” screen.
Back Setting:
Service
Mo 10:00
Function setting
Error history
I.U.address verification
Version
Test run
3
Select [Function setting] with pressing the [Cursor button (Up/Down)], and press the [Enter button].
Back:
Setting:
Service
Mo 10:00
Function setting
Error history
I.U.address verification
Version
Test run
4
Select [R.C. address] of the target indoor unit with pressing the [Cur-sor button (Up/Down)].
(R.C. Address : Remote Controller Address)
Cancel: OK:
Function setting
Mo 10:00
R.C. Function Setting
address No. No.
00
00 00
Version Error history
5
Select the [Function No.] with pressing the [Cursor button ( Left/ Right)], and select the Function No.
to be set with pressing the [Cursor button (Up/Down)].
Cancel: OK:
Function setting
Mo 10:00
R.C. Function Setting
address No. No.
Version Error history
00
00
00
6
Select the [Setting No.] with pressing the [Cursor button (Left/Right)], and select the Setting No.
to be set with pressing the [Cursor button (Up/Down)],and press the [Enter button].
Cancel: OK:
Function setting
Mo 10:00
R.C. Function Setting
address No. No.
Version Error history
00
00
00
-Note-
“Service” screen or “Function setting” screen returns to the
“Submenu” screen if there is no button operation for 1 minute.
03-09
